Most gutter leaks start at a joint. This guide explains why joints fail, how they are repaired and when resealing is no longer enough to keep water out.
A gutter run is made from lengths joined together, and each join relies on a seal, a gasket or a clip to stay watertight. Seals dry out and crack over the years. Movement from heat and cold, the weight of debris and sagging all pull at the joints until water begins to seep.
A leak at a joint is usually easy to spot. There is a drip at the same place every time it rains, and often a green or dark stain on the wall below.
Treating the symptom without finding the cause means the leak returns. A joint that opens because a bracket has failed will not stay sealed, however much sealant is used.
The joint is cleaned and dried, and the old seal removed. The gutter is realigned if needed and the bracket support checked. A new seal or a suitable sealant is then applied, and the clips closed. Water is run through to check the repair.
Temporary fixes have their place. A quick bead of sealant, or tape on a dry day, can buy time before a proper repair. They should not be thought of as the repair itself, though, and it is worth planning the proper fix before the next winter brings heavier rain.
On plastic gutters with push-fit joints, the gasket is often replaced. On older metal gutters, the joint may be bolted and sealed with a compound, and corrosion around it can limit what is possible.
If several joints leak, the gutter is warped or the plastic has gone brittle, replacing the run is often more sensible than a string of repairs. The same is true when the fascia behind is damaged and needs work, because the gutter has to come off anyway.
Colour and profile matching can be an issue. Older gutter profiles are not always available, and a new section may not match the old run exactly. In some cases it is neater, and no more difficult, to replace the whole side of a house in one go so the finish is consistent.
We repair leaking gutter joints across Cheshire and the surrounding area. A free quotation is available, and we will be honest if a joint is past repair.
Call or message Apex Roofing for a free quotation.
Often, yes. Cleaning, resealing and refixing a bracket can cure a single leak. If the gutter is cracked, warped or corroded, a section or run may need replacing.
The seal there has probably perished, or the gutter has sagged to open a gap. A drip at the same spot every time is a reliable clue.
It lasts when the joint is clean, dry and properly supported. Applied over dirt or to a moving joint, it often fails within a season or two.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com