Rated 5 stars on Google. Happy with the work we did for you? Leave us a Google review
Apex Roofingand Guttering Services Call 07377 461095

Velux Roof Windows · Warrington · 30 October 2026

A roof window fitted into an old tiled roof in Warrington

An old red-tiled roof in Warrington, green with moss, took a new roof window. Tiles came off around the opening, the frame went in with a felt collar dressed round it, and the flashing went on before the tiles were relaid.

Call 07377 461095 Get a free quote

This job was a roof window fitted into an existing tiled roof in Warrington. The tiles were old and weathered, red once and now green with moss, which is exactly the sort of covering where the work is as much about putting the tiles back properly as it is about the window itself.

The window is one of our Velux roof windows, set into the existing roof rather than into anything new, with the opening trimmed so the frame sits solidly and the tiling picks up neatly around it.

Opening the roof up

Tiles were lifted from around the position and set aside so they could go back afterwards. With the covering off, the opening was cut and trimmed in timber so the frame has something solid to sit on and the tiling has a proper edge to run to. One of the photographs shows this stage: the tiles stripped back, the timbers exposed and the frame being set into the opening, with the drill left on the slope above.

On an old roof some tiles break when they are lifted. Any that did were set aside and replaced rather than forced back in cracked.

Frame, collar and flashing

Once the frame was set and fixed, the underfelt collar was dressed around it and pleated down onto the roof, so any water that gets under a tile runs onto the felt and away from the opening rather than into it. The second photograph shows that stage: the frame in the opening with the grey collar dressed round it, and the room below visible through the hole.

The flashing kit then went on over the top. The side pieces tuck under the tile courses either side, the head is lapped under the tiles above, and the corrugated apron at the bottom is dressed down over the tiles below so it follows their profile. In the finished photograph the window sits in the slope with the apron lying over the tiles beneath it and the tiles relaid around the frame.

  • Tiles stripped back around the opening and kept for reuse
  • Opening cut and trimmed in timber
  • Window frame set and fixed
  • Underfelt collar dressed round the frame
  • Flashing kit fitted and tiles relaid around it

Why a roof window is worth doing

A roof window brings daylight and fresh air into a loft room, landing or back room that has little or none. Fitted properly into the existing covering, it does that without changing the look of the roof from the street.

We fit roof windows into tile and slate across the area — see our Velux installation work in Warrington. If you have a dark room under the roof that needs light, get in touch for a free quote and we will come and look at the roof first.

Common questions

Can a roof window go into an old tiled roof?
Yes. The flashing kit is matched to the covering, so the tiles lap over and under it in the same way they lap over each other.
What happens to the tiles that come off?
They are lifted from around the opening and set aside to go back afterwards. Any that break are replaced rather than forced back in cracked.
What stops rain getting in at the edges?
An underfelt collar dressed round the frame onto the roof underneath, and a flashing kit on top, dressed into the tile profile on all four sides.

Request a free quote

Tell us what the roof is doing and roughly where you are. We will come and look, and you get a written price before anything starts.

We use your details to reply to this enquiry and nothing else.