Moss and a fern were growing from the top of this Salford stack and the brickwork under them was breaking up. We opened up the top, rebuilt it and re-flaunched the crown.




This was a small stack, but the top of it was in poor condition. The first photograph shows what had happened: a fern was growing out of the crown, moss had spread across the flaunching and the top courses, and the brickwork underneath looked weathered and broken. Plants only root in a chimney top where water and debris are already sitting in it, so a fern on a stack is usually a sign the crown stopped shedding water some time ago.
With the top of the stack opened up, the second photograph shows loose brick and rubble inside the stack, and the courses at the top ragged and uneven. There was nothing sound there to repair onto, so the top was taken down rather than patched. The TV aerial was left in place on the stack.
The top of the stack was rebuilt in brick and the crown re-flaunched, which is the sloped bed of mortar that caps the stack and holds the pots in place. The third photograph shows the finished top: a smooth, sloping crown with the pots standing on it and a clean line of brickwork underneath. The lead flashing where the stack meets the roof is visible at the base.
Repointing and re-flaunching deal with worn mortar, as on our chimney flaunching repair in Warrington. Once the brick itself has broken up, or the top courses have come loose, mortar alone will not hold and the stack needs rebuilding. For the full range, see chimney stack repairs and flaunching repairs.
If you can see plants or loose brick at the top of your chimney, send a photograph through the enquiry form and we will tell you what we think it needs. See chimney repairs for everything we take on.
Tell us what the roof is doing and roughly where you are. We will come and look, and you get a written price before anything starts.