Home › uPVC Soffit and Fascia Installation in Cheshire › uPVC Fascia Boards
uPVC fascias

uPVC Fascia Boards: Fitting and Replacing

The fascia is the board you see along the edge of the roof, behind the gutter. When timber fascias rot, uPVC boards are a common, low-maintenance replacement.

What a fascia board does

The fascia runs along the bottom edge of the roof, fixed to the ends of the rafters. It carries the guttering, closes off the roof edge and gives a neat finish. Because the gutter hangs from it, a weak fascia means a sagging gutter and water running where it should not.

Signs your fascias need replacing

  • Peeling paint that keeps coming back
  • Soft, spongy or crumbling timber when pressed
  • Gutters sagging or pulling away from the boards
  • Gaps at the joints or between the fascia and soffit
  • Dark staining, or green growth along the board
  • Nesting birds or insects getting in behind

What uPVC offers

uPVC boards do not rot, and they do not need repainting. A wipe with soapy water keeps them looking tidy. They come in a range of profiles and colours, white being the most common, and can be matched to existing soffits and bargeboards for a consistent look.

They are not magic. Fitted over rotten timber or onto weak rafter ends, a uPVC board will not last. The structure underneath has to be sound.

How replacement is done

The old gutters are taken down first, then the old boards are removed. This is when the rafter ends are checked. Any that are soft or wet are cut back or repaired so the new board has something solid to fix to.

New boards are cut to length, fixed to the rafter ends and joined neatly, with the joints placed where they will be least visible. Matching corners and trim pieces are fitted, and the gutters are refitted or replaced, set to a gentle fall towards the downpipes.

What affects the job

  • Access and height, which determine whether a scaffold or tower is needed
  • The condition of the rafter ends and the soffit
  • Whether the existing gutters can be reused or should be replaced
  • The style of the house and the profile of board that suits it
Boards fitted straight over rotten timber hide the problem rather than solving it. Ask whether the old fascia will be removed, and whether the rafter ends will be checked.

Cover boards or full replacement

Some firms offer cover boards that fit over existing timber. That can work where the timber is sound, but it depends on the substrate and the system, and where timber is damaged, replacement is the proper route.

Fixings matter too. Boards should be fixed with suitable pins or screws into the rafter ends at sensible spacing, and joints should be backed with a short piece of board so they cannot open as the plastic expands and contracts with temperature.

Appearance is worth a thought before you order. Boards come in plain flat profiles and in styles with a curved or ogee edge, and the better match depends on the age and character of the house. On a terrace or semi, matching the neighbour's roofline can keep the street looking consistent, although that is your choice.

Some questions are worth putting to any roofer before you agree to the work.

  • Will the old boards be removed and the rafter ends checked?
  • Will the gutters be refitted or replaced?
  • What colour and profile are available to match the existing roofline?

If you would like your roofline looked at, call Apex Roofing to arrange a free quotation. We will tell you what we find, what needs replacing and what, if anything, can be left alone.

Want this looked at?

Call or message Apex Roofing for a free quotation.

Questions on this topic

Can uPVC be fitted over old timber?

Only where the timber underneath is sound and the system allows it. Rotten timber should be removed rather than covered.

Do uPVC fascias need painting?

No. They are cleaned with soapy water. They do not need repainting.

Will new fascias match my soffits?

Boards are available in common colours and profiles, so they can usually be matched or replaced together.

More uPVC Soffit and Fascia Installation Guides

All uPVC Soffit and Fascia Installation information →

Our Work

Recent uPVC Soffit and Fascia Installation Jobs

Real jobs photographed by Apex Roofing.

See all our projects →

Areas We Cover

uPVC Soffit and Fascia Installation Across Cheshire and Nearby

Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.

Find Us

Local Roofing Contractors Covering Cheshire

Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ

📞

Telephone

07377 461095

💬

WhatsApp

+44 7465 861265

Free Quotation

Get a Free Quote

Tell us about the property and what you have noticed and we will come back to you.

Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com