Ridge repointing, chimney leadwork and re-bedded pots in Blackpool
Ridge and hip repointing, chimney leadwork made good and both pots re-bedded on a Blackpool house. Photographs of each stage of the work.
Shortening a chimney can solve problems with a damaged or leaning upper stack, but it is not always straightforward. Here is what has to be considered first.
A stack may be reduced because the upper part is damaged, cracked or unstable, because a tall stack is no longer needed or because it is expensive to keep repairing at height. Sometimes the aim is to remove a hazard without taking the whole chimney away.
Reduction means taking the stack down to a lower level, usually still above the roof, and finishing it with a new crown or capping.
A stack that serves a working appliance usually needs to be a minimum height above the roof for the flue to work safely. Reducing it too far could cause problems, so it is better to ask a professional than to guess.
Many terraced and semi-detached homes share a chimney stack with the neighbour. Altering such a stack may be a matter for the Party Wall regime, and you may need to talk to the neighbour first. A surveyor can advise on whether this applies.
If the property is listed or in a conservation area, or if the chimney is a feature of the street, the council may need to give consent before it is changed. Building regulations may also apply. These points depend on the property, so check with your local council or a surveyor before agreeing to work.
Scaffolding goes up first. The pots, flaunching and upper courses are taken down carefully, and the remaining stack is checked for soundness. Any loose or cracked brickwork is cut out or repaired. The stack is then finished with a new capping or flaunching, with a vent if a flue is staying in use, and the flashing at the roof is checked and renewed if necessary.
Debris is cleared from the flue so it does not fall into the house, and the work area is cleaned up.
If the top is the only problem, rebuilding the upper courses to the original height may be possible. A full removal is another option when the chimney is not needed, though that has its own considerations. A roofer should talk through the options.
If you are thinking about reducing a chimney, Apex Roofing offers a free inspection and free quotation. Call to discuss your stack.
Call or message Apex Roofing for a free quotation.
Not always. It depends on the flue use, the structure of the stack, whether it is shared and any consent requirements. An inspection is needed to say whether reduction is suitable.
If the stack is shared, possibly. The Party Wall regime may apply to work on shared structures, so check with a surveyor before starting.
It can remove a defective top section, but leaks often come from flashing or pointing, which still need to be dealt with. The cause should be identified first.
Real jobs photographed by Apex Roofing.
Ridge and hip repointing, chimney leadwork made good and both pots re-bedded on a Blackpool house. Photographs of each stage of the work.
Mossy mortar raked out of a stone-slated roof in Warrington. The chimney cow was re-bedded and the flaunching renewed, then the whole ridge line was re-pointed.
A Warrington chimney crown re-flaunched after the old fillet crumbled away and left the flue terminal unsupported. Photographs of the work.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com