Home › Chimney Repairs in Cheshire › Chimney Repointing
Chimney repointing

Chimney Repointing: Why It Matters and How It Is Done

Chimney repointing replaces the worn mortar between the bricks. Done in good time, it protects the stack from water and frost and can avoid a rebuild later.

Why chimney mortar fails first

A chimney stack is exposed on all four sides. It takes rain, wind and frost with nothing to shelter it, and heat from the flue inside adds to the strain. The mortar joints are softer than the bricks, so they are the part that wears away first.

Once joints are open, rain soaks into the brickwork. In cold weather that water freezes and expands, which loosens more mortar and can spall the face of the bricks.

Signs your chimney needs repointing

  • Mortar that is crumbling, sandy or missing, leaving visible gaps between bricks.
  • Joints recessed deeply, so the bricks look as though they are sitting loose.
  • Loose mortar in the gutter, on a flat roof below or on the ground.
  • Damp patches or staining on the chimney breast indoors.
  • Plants or moss taking root in the stack.

Binoculars from the ground will often show whether the joints are failing. Anything beyond that is best checked by a roofer on a safe working platform.

How repointing is done

Scaffolding or a safe working platform comes first, because chimneys are high and awkward to reach. Loose and failed mortar is then raked out to a suitable depth, usually a little more than the joint width, taking care not to damage the brick edges.

The joints are brushed clean, dampened to control suction and filled with fresh mortar in layers, then finished to a profile that sheds water. The finish should be tidy and consistent, and match the existing pointing in colour and style where possible.

Why the mortar matters

Mortar should be softer than the brick it holds. A mix that is too hard and strong, such as straight cement on old soft bricks, can trap moisture and damage the brickwork. Ask what mix is being used and why.

Older properties often have soft clay brick or stone and were built with lime-based mortar. The repointing mix should be compatible with the masonry rather than simply the strongest available. The right mix depends on the age and type of the stack.

While access is in place, it makes sense to inspect the other parts of the chimney. That includes the flaunching around the pots, the lead flashing where the stack meets the roof, any cracks in the bricks and the condition of the pots themselves. A stack with failing pointing often has other worn details, and it makes sense to deal with them together.

When repointing is not enough

If bricks are crumbling, the stack leans or has visible cracks, or a section is loose, repointing will not address the cause. Rebuilding part or all of the stack may be the correct repair. A good roofer will say so, rather than covering a poor stack with fresh mortar.

Questions to ask

  • What mortar mix is being used, and is it right for my bricks?
  • How far will the old joints be raked out?
  • Will the flaunching and flashing be inspected too?
  • Is scaffolding or a safe platform included?

If your chimney pointing is looking tired, Apex Roofing offers a free inspection and free quotation. Call to discuss what the stack needs.

Want this looked at?

Call or message Apex Roofing for a free quotation.

Questions on this topic

How do I know if my chimney needs repointing?

Crumbling or missing mortar, deeply recessed joints and mortar debris below the stack are the common signs. Damp on the chimney breast indoors can also point to open joints higher up.

Can I repoint a chimney myself?

It is not recommended. The work is at height, usually needs scaffolding, and the wrong mortar can damage the brickwork. A roofer can do it safely and with a suitable mix.

Is repointing a chimney the same as rebuilding it?

No. Repointing renews the mortar joints on sound brickwork. Rebuilding is needed if bricks are loose, cracked or the stack is unstable.

More Chimney Repairs Guides

All Chimney Repairs information →

Our Work

Recent Chimney Repairs Jobs

Real jobs photographed by Apex Roofing.

See all our projects →

Areas We Cover

Chimney Repairs Across Cheshire and Nearby

Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.

Find Us

Local Roofing Contractors Covering Cheshire

Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ

📞

Telephone

07377 461095

💬

WhatsApp

+44 7465 861265

Free Quotation

Get a Free Quote

Tell us about the property and what you have noticed and we will come back to you.

Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com