Ridge repointing, chimney leadwork and re-bedded pots in Blackpool
Ridge and hip repointing, chimney leadwork made good and both pots re-bedded on a Blackpool house. Photographs of each stage of the work.
Removing a chimney can free up space and end a maintenance headache, but it affects the structure of the house. Support, ventilation and flues all need careful thought first.
People remove chimneys for different reasons: the stack is in poor condition, the fireplace is unused, a loft conversion needs the space, or a leaning stack has become a worry. Whatever the reason, the chimney is part of the building's structure and removing it is not just a roofing task.
There are two main forms of removal. The stack can be taken down to roof level and the roof made good, or the whole chimney breast can be removed down to ground floor or beyond, inside the house.
None of these is a reason to avoid removal, but each should be checked before work starts.
Building regulations may apply, particularly if structural support is changed. Listed buildings and properties in conservation areas may need consent before a chimney comes down. What applies depends on the property, so ask the council or a surveyor, and ask your roofer whether they expect any approvals to be needed.
Where only the stack above the roof is coming down, scaffolding is set up and the pots, flaunching and brickwork are removed course by course. The flue opening is dealt with so rain cannot enter, which usually means capping the remaining structure properly. The roof is then made good: tiles or slates are reinstated, the area is re-battened where needed, and the roof covering is weathered over the gap.
Any debris is lowered safely and cleared away. The flue below should not be left open to the weather.
If the problem is only the top of the stack, repair, rebuild or reduction may involve less effort and disruption. If the chimney adds character to the street, keeping it may also be worth weighing up.
Plan for the aftermath as well. Once a stack or breast is removed, walls may need plastering, floors need making good and decorating follows. If the chimney carried a flue from another room, that opening must be dealt with properly. Ask what is included in the quotation so you know what is left for you to organise.
If you are considering chimney removal, Apex Roofing offers a free inspection and free quotation. Call to discuss what your property needs.
Call or message Apex Roofing for a free quotation.
Sometimes, subject to structural and ventilation considerations. Support for the chimney breast, shared flues and any consents need to be checked before the work is agreed.
It depends on the property. Listed buildings, conservation areas and structural changes may involve consents or building regulations, so check with your council or a surveyor.
If the leak came from the stack, flashing or crown, removal and a proper roof repair would remove that source. The cause should be confirmed before choosing removal.
Real jobs photographed by Apex Roofing.
Ridge and hip repointing, chimney leadwork made good and both pots re-bedded on a Blackpool house. Photographs of each stage of the work.
Mossy mortar raked out of a stone-slated roof in Warrington. The chimney cow was re-bedded and the flaunching renewed, then the whole ridge line was re-pointed.
A Warrington chimney crown re-flaunched after the old fillet crumbled away and left the flue terminal unsupported. Photographs of the work.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com