A rotten deck replaced and covered in torch-on felt in Warrington
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
A flat roof on an extension has to keep water out, hold in heat and meet the old house wall neatly. This guide covers the details that decide how well it performs.
Single-storey extensions often finish with a flat roof, because it is a practical way to add a kitchen, dining room or utility space without affecting the first-floor windows. Unlike a garage, the room below is lived in, so a leak or cold ceiling is noticed straight away.
That makes the roof build-up important. It is not only a waterproof covering. It is a deck, insulation, a way of controlling moisture and a set of edge details working together.
Which arrangement suits an extension depends on the ceiling height, the joist depth and the thermal performance required. Building regulations may apply to new work, so it is worth asking your council or building control what is needed.
Most failures happen at the edges rather than in the middle. The junction with the house wall is the main one. Flashing or an upstand needs to be properly dressed and sealed, and the wall's own damp-proofing should not be bridged.
Other weak points include rooflights, pipes and the outlet. Each is a hole in the covering, so the details around them need proper attention.
Flat roofs are not truly flat. They need a slight fall so that water runs off. Without it, puddles form, the covering ages faster and leaves and dirt collect. On an extension, the fall is usually built into the structure or provided by tapered insulation.
Outlets matter as much as the slope. A gutter or outlet that is too small, or set in the wrong place, can let water pool even on a roof with a good fall. It is worth asking where the water goes after it leaves the roof, and whether it can be taken to a downpipe, drain or soakaway without causing problems elsewhere.
Many extension roofs include a rooflight or lantern. These need their own kerb or upstand, and the covering has to be dressed up to it. If you are adding one during a replacement, it is easier to plan it from the start.
We install and replace extension flat roofs in Cheshire and the surrounding area. If you would like us to look at yours, a free quotation is available.
Call or message Apex Roofing for a free quotation.
Usually it does, and building regulations may require it for new work. The right type and thickness depend on the design, so confirm with your council or building control.
The wall junction is a common weak point. Lifted flashing, a failed seal or a poorly formed upstand lets water behind the covering. It is worth having the detail inspected before anything else.
Yes, but it is simpler when the roof is being replaced. Cutting into an existing roof means altering the structure and covering, so it needs proper planning.
Real jobs photographed by Apex Roofing.
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com