A rotten deck replaced and covered in torch-on felt in Warrington
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
GRP, often called fibreglass roofing, forms a hard, jointless waterproof skin over a flat roof deck. This guide covers how it is built and when it is a sensible choice.
GRP stands for glass-reinforced plastic. On a roof, glass matting is laid on the deck and saturated with resin, then finished with a top coat. It cures into a single rigid sheet with no overlaps or welded joins across the main area.
That seamless finish is the reason people choose it for small to medium flat roofs, particularly over a garage, a porch or a modest extension.
Because GRP is rigid, it does not stretch to cope with a deck that moves. The boards underneath need to be sound, dry and firmly fixed. If the timber flexes or shifts with the seasons, hairline cracks can appear in the surface.
For that reason the preparation is a major part of the job. Boards are checked, anything rotten is replaced and the surface is made ready before any resin is mixed.
Resin needs dry conditions to be applied and to cure properly, so the weather decides when this work can go ahead. A roofer who is straightforward about that is more reliable than one who promises a fixed date.
GRP tends to suit roofs with a regular shape and a stable structure. Where there is a lot of movement, or the roof is large with expansion concerns, another system may be more forgiving. It also depends on how often people walk on the roof, since a hard surface wears differently from a soft one.
Colour and finish can be chosen at the top coat stage. Edges and upstands should be discussed beforehand so you know how the roof will look from the ground.
A localised crack or a damaged edge can often be repaired with resin and matting. If the surface is crazed across the whole roof, or water has got into the deck below, patching only delays the problem. In that case a flat roof replacement with a new deck and covering is the more honest answer.
If you are considering GRP fibreglass roofing in Cheshire or the surrounding area, we can inspect the roof and tell you whether it is the right fit. A free quotation is available; call to discuss.
Call or message Apex Roofing for a free quotation.
When laid properly on a sound deck, the cured surface forms a continuous waterproof layer. Most problems come from poor preparation or a moving deck, not from the material itself.
A GRP roof is hard-wearing and can usually take light foot traffic for maintenance. Heavy or constant use depends on the finish and the structure, so say if you plan to use it.
Yes. Resin needs dry surfaces to bond and cure, so wet or very cold conditions can delay the work. Any honest roofer will plan around that rather than rush it.
Real jobs photographed by Apex Roofing.
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com