A rotten deck replaced and covered in torch-on felt in Warrington
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
A flat roof stays dry only if water has somewhere to go. This guide covers falls, outlets, gutters and edge trims, the parts of a roof that decide how long it lasts.
Flat roofs are designed to shed water gently, not hold it. If water stands on the surface for long periods, it speeds up wear, gathers dirt, grows moss and puts extra pressure on seams and edges. Good drainage is one of the simplest ways to extend the life of a roof, and one of the easiest to get wrong.
Every flat roof needs a fall so that water moves toward an outlet or gutter. The slope is often barely visible, but it is built into the deck or formed using tapered insulation or firring strips.
If an existing roof has ponds, the falls are usually the cause. Fitting a new covering over unchanged falls repeats the problem, so it is worth asking whether they are being corrected as part of the work.
Each needs to be sized for the roof area and kept clear. A blocked outlet can turn a roof into a shallow pond within a single storm.
The perimeter is where flat roofs commonly fail. The trim at the edge holds the covering down and throws water clear of the fascia. A well-fitted drip trim directs the flow into the gutter. A poor one lets water run back behind the fascia, where it rots timber and stains walls.
Trims are made from aluminium, uPVC or other formed profiles, and the type is usually matched to the covering system. Joints and corners need to be neat and sealed.
Gutters that serve a flat roof take a large volume of water in a short time. Joints, brackets and outlets need to be sound, and they should be cleared regularly of leaves and silt. Sagging runs hold water and spill over the front.
It also helps to keep the area around outlets clear. A simple leaf guard or regular sweep can prevent debris from blocking the outlet, but it needs checking from time to time. After heavy rain, look at the roof edge and the ground below. Overflow marks, damp patches or water running down the wall are early signs that something is not draining as it should.
We install and renew flat roof drainage and edge trims in Cheshire and the surrounding area. A free quotation is available, and we are happy to look at the details with you.
Call or message Apex Roofing for a free quotation.
Usually the falls are inadequate, the deck has dipped, or an outlet is blocked. A roofer can check which, and whether the fall can be corrected during a re-roof.
It secures the edge of the covering and sheds water clear of the fascia into the gutter. A damaged or poorly fitted trim is a frequent source of leaks and rotten timber.
Many do, though some drain through outlets or parapet spouts. What suits yours depends on how the building is built and where the water can go.
Real jobs photographed by Apex Roofing.
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com