A rotten deck replaced and covered in torch-on felt in Warrington
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
The edges of a flat roof take a lot of punishment. Trims, upstands and wall junctions are common leak points, and often easier to put right than a whole roof.
Around a flat roof, the covering has to be finished off in a way that keeps water moving off the roof and out of the structure. At the lowest edge that is usually a drip trim that throws water clear into the gutter. At the sides it may be a similar trim or a raised kerb. Where the roof meets a wall, an upstand and flashing seal the junction.
The edge is also where covering, trim and gutter all have to work together. A fault in any one of them can make the others fail, which is why the whole edge is looked at, not just the piece that is visibly broken.
Edge trouble often shows up on the fascia or soffit first: stains, flaking paint, or timber that feels soft. From inside, damp near an outside wall at ceiling level can point to a perimeter fault.
Because the edge sits close to the gutter, a repair is often a good moment to look at the guttering too. A blocked or sagging gutter will soon spoil a new trim.
The type of covering, the age of the roof and the condition of the timber at the edge all matter. On a GRP roof, trims are often part of the system. On felt or EPDM they are usually separate pieces. If a trim has been missing or poorly fitted from the start, the repair may be a small redesign rather than a like-for-like swap.
Corners and joins in the trim deserve particular attention. Where two lengths meet, or where a trim turns a corner, water finds the smallest gap. Good practice is to overlap joints in the direction of water flow and seal or cover them in a way that suits the material.
Access can be awkward at the edge, particularly on two-storey extensions. Scaffolding or edge protection may be needed to carry out the repair safely, and that is worth discussing when you get a quotation.
If the covering is brittle all over or the deck at the edge is soft, edge repairs only buy time. Ask a roofer what they have found under the trim and how they will keep the edge dry in future. If your flat roof edge needs attention, we offer a free survey and a free quotation.
Call or message Apex Roofing for a free quotation.
It is a profile at the roof edge that guides water away from the fascia and into the gutter. Without one, water can run back under the covering.
Sometimes. It depends on whether the covering and the timber behind it are sound. The trim and the covering need to be properly joined.
Water running over or behind the edge is the usual cause. Faulty trims, blocked gutters and damaged coverings can all contribute.
Real jobs photographed by Apex Roofing.
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
Commercial parapet wall sealing at St Helens RFC. The coping run was cleaned back and the junction with the profiled metal stand roof sealed and checked.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com