A rotten deck replaced and covered in torch-on felt in Warrington
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
Seams and joints are where a flat roof covering is held together. When they open, water follows. Here is what causes it and how a sound repair is made.
Most flat roof coverings are made from sheets or rolls that overlap or join. On felt roofs, laps join one roll to the next. On EPDM, seams are bonded or taped, and where a single sheet is not used, joints need to be formed carefully. GRP is usually applied as a continuous layer, but it still has joints at the edges and at changes of direction.
These are all places where the waterproofing relies on a bond, and bonds can fail.
A lap that has lifted, curled or shows a dark gap is a clear sign. On EPDM, edges of the tape may be visible or the sheet may be peeling at a corner. Inside, damp on the ceiling in a line often follows a joint.
Water can travel under the covering and appear a long way from the opening, so the visible gap is only part of the story.
Using the wrong adhesive or sealant is a frequent reason repairs fail. Felt, EPDM and GRP each need their own methods.
Weather matters when seams are repaired. Adhesives and heat-bonded joints need dry, reasonably warm surfaces to bond properly, so a roofer may need to wait for suitable conditions rather than rushing a repair in the damp. That is a sign of care, not delay.
It is also worth finding out how the joint was originally made. A seam made with the wrong overlap or an unsuitable tape will fail again however well it is patched, and the proper answer may be to lift and re-form the whole joint.
The age of the roof, the number of affected seams and the condition of the deck all play a part. If a roof has seams failing in many places, the adhesive or bond has likely reached the end of its life and replacement may be more sensible than repeated repairs. A roofer should be able to tell you how many seams they found and what they recommend for each.
If you can see seams lifting on your flat roof, we offer a free survey and a free quotation.
Call or message Apex Roofing for a free quotation.
Often yes, if the surrounding covering is sound and the surfaces can be cleaned and dried. The method must suit the type of covering.
Age, movement, standing water and poor original workmanship are common causes. Often it is a mix.
It may slow a leak briefly, but it usually cracks and hides the real condition. A proper bond repair is better.
Real jobs photographed by Apex Roofing.
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
Commercial parapet wall sealing at St Helens RFC. The coping run was cleaned back and the junction with the profiled metal stand roof sealed and checked.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com