Home › Flat Roof Repairs in Cheshire › Punctures and Blisters
Punctures and blisters

Flat Roof Punctures and Blisters: What They Mean and What to Do

A bubble or a hole in a flat roof covering is easy to ignore until water gets in. Here is what causes blisters and punctures and how they are dealt with.

Blisters and punctures are different problems

A puncture is a hole or tear, often from a dropped tool, a fallen branch or someone walking on a brittle surface. A blister is a raised pocket in the covering, most commonly seen on felt roofs. They need different thinking, though both can let water in.

Why blisters form

A blister generally forms when moisture or air is trapped beneath the covering. Sun warms the roof, the trapped air or vapour expands and the covering lifts. Over time the blister can crack and let water into the layer below.

  • Damp in the deck or insulation beneath the covering.
  • Poor bonding between layers when the roof was laid.
  • Laying felt over a wet surface.
  • Heat and sun cycling the roof from hot to cold.

Common causes of punctures

  • Foot traffic, particularly on older, brittle felt.
  • Tools, ladders and scaffold feet.
  • Falling branches, or objects thrown up by wind.
  • Fixings and fittings such as aerials or satellite dish mounts.
  • Birds and animals pecking or scratching at the surface.

Is a blister a problem?

Not always. A small intact blister on a roof that is otherwise sound may simply be monitored. A blister that is large, split or on a joint should be looked at. If you press it and it feels wet or spongy, there is probably moisture beneath.

It also helps to think about what caused the puncture, because that decides whether it will happen again. If a branch is overhanging the roof, it may need cutting back. If a dish or aerial bracket is fixed through the covering, the fixing may need sealing or moving. If people walk on the roof for maintenance, a walkway protects the surface.

Photographs help. A close photograph of a blister or hole, taken from a window or a safe position, gives the roofer something to compare against when they inspect, and lets you track whether it changes.

Never cut open or squash a blister to see what is inside unless a roofer advises it. It is much easier to make a leak than to repair one.

How repairs are made

  • Check the area for moisture; wet material must be removed, not covered.
  • Cut out the blistered or punctured section back to sound, well-bonded covering.
  • Dry the exposed layers, and replace damaged insulation or deck.
  • Patch with a repair suited to the covering, such as new felt layers, an EPDM repair patch or GRP resin and matting.
  • Seal the edges and check surrounding areas.

A patch laid over a wet blister will fail. Drying and removing damp material is the part that makes the difference.

What affects the choice, and when repair is not enough

The extent of damage, the age of the roof and the condition of the deck all matter. A few isolated punctures can be repaired. Widespread blistering often means the roof has moisture trapped beneath and may need replacing. Ask a roofer how they will check for damp and what they will do if the deck is found to be wet.

If you have a blister, tear or hole in a flat roof, we can inspect it free of charge and give a free quotation.

Want this looked at?

Call or message Apex Roofing for a free quotation.

Questions on this topic

Should I worry about a small blister?

A small, intact blister on an otherwise sound roof can be watched. If it grows, splits or the ceiling below shows damp, have it checked.

How is a puncture repaired?

The damaged area is cleaned back to sound covering and patched using a method suited to the material. The patch must overlap well and be sealed at the edges.

Can blisters come back after repair?

If the cause was trapped moisture and it has been removed, a repair should hold. If damp remains in the deck, blisters may recur.

More Flat Roof Repairs Guides

All Flat Roof Repairs information →

Our Work

Recent Flat Roof Repairs Jobs

Real jobs photographed by Apex Roofing.

See all our projects →

Areas We Cover

Flat Roof Repairs Across Cheshire and Nearby

Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.

Find Us

Local Roofing Contractors Covering Cheshire

Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ

📞

Telephone

07377 461095

💬

WhatsApp

+44 7465 861265

Free Quotation

Get a Free Quote

Tell us about the property and what you have noticed and we will come back to you.

Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com