A rotten deck replaced and covered in torch-on felt in Warrington
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
A split in a flat roof covering lets water in quickly. Here is why felt, EPDM and GRP roofs crack, how repairs are made and when they are not enough.
A flat roof covering is only a thin waterproof skin, and it has to cope with sun, frost, foot traffic and movement in the building beneath. Over time that wears it out. Splits can appear in felt as it ages and becomes brittle, in GRP when the structure beneath flexes, and in EPDM where it has been damaged or poorly bonded.
Splits are rarely random. They often follow the line of a joint in the deck, a corner or a place where the roof was stretched when it was laid.
On a roof you can reach safely from a window or an upper floor, look for dark lines, open seams and areas where the surface has lifted. Inside, damp patches on the ceiling below are the usual first sign. Be careful: the visible split is not always where the water is coming in, because it can travel along the deck before it shows.
Different coverings need different repair methods. Putting liquid sealant on EPDM or a felt patch on GRP will not hold. A roofer should be able to say what material your roof is and how they will treat it.
The covering matters when choosing a repair. Felt roofs are repaired with felt, EPDM with EPDM and compatible adhesive, and GRP with resin and glass matting. Mixing them up is one of the commonest reasons a repair fails within a season or two, so it is worth asking what your roof is made of before anyone starts.
The age of the roof, how widespread the cracking is and whether the deck is sound all matter. A single split in a fairly new roof is a simple repair. Many splits across an old roof suggest the covering has reached the end of its life.
If the covering is brittle across the whole roof, or the deck is soft or wet, patching is only a short-term measure. We will say so if that is what we find. Ask any roofer how they have established that the deck is dry and sound, and what they will do if it is not.
If you have a split or a leak on a flat roof, we offer a free inspection and a free quotation.
Call or message Apex Roofing for a free quotation.
Small temporary patches are possible, but the roof needs to be dry and the right product used for the covering. Working on a roof is risky, so it is often better to have it looked at.
Edges and corners are under tension and exposed to weather. Poor detailing, ageing material or movement at the trim can all cause splits there.
It depends on the roof's condition. On a sound roof with a single fault, it can. Where the covering is old and brittle, further splits are likely.
Real jobs photographed by Apex Roofing.
A leaking flat roof in Warrington taken off to the joists, re-decked in exterior-grade plywood and covered in torch-on felt. See the photographs.
Commercial parapet wall sealing at St Helens RFC. The coping run was cleaned back and the junction with the profiled metal stand roof sealed and checked.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com