Re-covering and re-sealing a curved bay roof in Altrincham
A curved bay window roof in Altrincham stripped back, re-covered and re-sealed at the wall junction after weather damage. Photographs included.
A valley collects the rain from two roof slopes and sends it to the gutter. That makes it one of the hardest-working and most leak-prone parts of a roof.
Where two roof slopes meet at an internal angle, a valley carries the water from both down to the gutter. All that water follows a narrow line, so the valley lining and its edges need to be sound. If they are not, the leak is often serious and can show up well away from the valley itself.
Valleys are made in several ways: lead-lined, with a GRP or other preformed channel, or with tiles cut and mitred together in a mortar-bedded or closed arrangement. Each fails in its own way.
Blocked valleys are common beneath overhanging trees. A little regular clearing can prevent a lot of trouble.
The first step is to see what is actually happening. The valley is cleared of debris and moss so the lining and the adjoining tiles can be examined properly. Sometimes the problem is simply a blockage, and clearing the channel restores normal drainage.
If the valley has been blocked for a long time, the underlay and timbers below may have been wet for a while, so those are checked too.
Where the lining has failed, tiles or slates along each side of the valley are lifted back, the old lining is removed and the timber boards beneath are checked. A new lining is then fitted, which might be lead, a preformed GRP valley trough or a dry valley system, depending on the roof. The tiles are then reset to the correct overlap on each side.
A small crack in lead may allow a local repair. If the lining is perished along its length, or the valley has been repaired several times already, relining the whole valley is usually more dependable than another patch. This will mean lifting some tiles on both sides, which is why it is worth getting an honest description of what is involved.
It is worth looking at the gutter the valley discharges into. A valley that delivers a lot of water to a small, blocked or sagging gutter can overflow even when the lining is perfectly sound. Clearing the gutter, checking its fall and making sure the downpipe is free-running are small jobs that make the whole valley work as intended.
If you suspect a valley problem, Apex Roofing can inspect it and give a free quotation. Call to talk through what you have noticed.
Call or message Apex Roofing for a free quotation.
Damp patches on ceilings near where two roof slopes meet, water stains in the loft along the valley line and overflowing water at valley edges are common signs.
Yes. A blocked valley can back water up under the tiles at its edges, so water gets in even when the lining is sound. Clearing the debris is often the first step.
A dry valley is a preformed channel, usually in plastic or GRP, with tiles cut to its edges and no mortar. It avoids mortar cracking and is sometimes used when valleys are renewed.
Real jobs photographed by Apex Roofing.
A curved bay window roof in Altrincham stripped back, re-covered and re-sealed at the wall junction after weather damage. Photographs included.
Ridge and hip repointing, chimney leadwork made good and both pots re-bedded on a Blackpool house. Photographs of each stage of the work.
Mossy mortar raked out of a stone-slated roof in Warrington. The chimney cow was re-bedded and the flaunching renewed, then the whole ridge line was re-pointed.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com