Two roof windows cut into a tiled back roof in Macclesfield
Two roof windows cut into the low tiled roof of a single storey range in Macclesfield, trimmed, felted, flashed and the concrete tiles relaid around them.
Single-storey kitchens and rear extensions are often dark in the middle. A rooflight can change that, but the type of roof decides what you can fit.
A kitchen extension usually has windows or doors at one end and a long dark middle. Light from above reaches further into the room than light from the side. That makes rooflights popular for extensions, lean-to roofs and single-storey ranges.
The first question is what kind of roof you have. A pitched roof covered in tiles or slates can take a roof window designed for that. A flat roof, or one with a very low pitch, needs a different kind of rooflight, often fitted on a raised kerb. The two are not interchangeable.
Low-pitched roofs deserve special care. Some roof windows are only made for pitches above a certain angle, and a low roof may need a different product. This depends on the roof, which is why it needs checking.
On a tiled single-storey roof, the work is similar to fitting a window in a main roof: lift the tiles, trim the opening, dress the underlay or membrane, fit flashings and relay the covering. On a flat roof, the opening is framed and a kerb is built up, then the roof covering is dressed up to it and the rooflight is fixed.
In both cases the join between roof and window is the critical part. It needs to shed water in every direction, including when wind drives rain against it.
Rooflights in extensions may be covered by building regulations in relation to insulation and glazing, and planning rules may apply depending on the property. Your designer or council can advise.
Safety and cleaning deserve a mention. Glass above a cooking area gets splashed with grease and steam, and a rooflight that is hard to reach will end up grubby. Positions that allow a cleaning pole to reach, or that can be accessed from inside, are worth considering. The same goes for blinds, which are easier to plan for before the window goes in.
Finally, think about what is above the roof. Overhanging trees drop leaves and sap onto glass, and a rooflight under a tree needs cleaning more often. That is not a reason to avoid one, but it may influence which position you pick.
If you are thinking about roof windows, call Apex Roofing to arrange a free quotation. We will look at the roof, talk through what is possible and tell you honestly what we would recommend.
Call or message Apex Roofing for a free quotation.
Often, depending on the roof type, pitch and structure. A survey shows whether the position and size are workable.
South-facing glazing can add heat. Blinds and glazing options can help control it.
Yes. Flat roofs normally need a rooflight on a raised kerb with the roof covering dressed up to it.
Real jobs photographed by Apex Roofing.
Two roof windows cut into the low tiled roof of a single storey range in Macclesfield, trimmed, felted, flashed and the concrete tiles relaid around them.
A roof window cut into an old tiled roof in Warrington: tiles lifted, opening trimmed, felt collar dressed round the frame, flashing fitted and tiles relaid.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com