Two roof windows cut into a tiled back roof in Macclesfield
Two roof windows cut into the low tiled roof of a single storey range in Macclesfield, trimmed, felted, flashed and the concrete tiles relaid around them.
Fitting a new roof window means cutting a hole in a working roof and making it watertight again. Done carefully it is a straightforward job, but the detail around the frame is what counts.
A roof window sits in the plane of the roof and lets daylight and ventilation into a room that has no wall window. It is common in lofts, attic rooms, landings and upper-floor spaces where a dormer would be too much work. Unlike a skylight on a flat roof, it is designed for a pitched roof covered in tiles or slates.
Not every roof takes a roof window in every position. The pitch, the spacing of the rafters, the type of covering and the room layout below all affect what can be done. A window that is too large for the rafter spacing may need extra timber work to trim the opening.
The first step is marking out the position from inside and outside, so the window lines up with the room and the rafters. Tiles or slates are then lifted from the area and set aside for reuse.
The rafters are trimmed with new timbers to frame the opening. This is the structural part of the job and it is where an experienced roofer earns their keep. The window frame is fixed to the structure, and a collar or membrane is dressed from the underlay up to the frame so water cannot get behind it.
Flashings are then fitted around the frame, working from the bottom upwards so each piece overlaps the one below. Tiles or slates are relaid around the flashing, and the inside is made good around the opening.
If the roof structure is weak, the covering is near the end of its life, or the room needs far more light than a window can provide, a different approach may be better. Cutting into an old roof that is about to be re-covered is rarely sensible. It may be better to combine the two jobs.
If you are thinking about roof windows, call Apex Roofing to arrange a free quotation. We will look at the roof, talk through what is possible and tell you honestly what we would recommend.
Call or message Apex Roofing for a free quotation.
Often, yes, subject to pitch, rafter layout and the covering. A survey shows whether the position you have in mind will work.
A properly fitted window with the correct flashing and underlay collar should not. Leaks usually come from poor flashing or damaged surrounding tiles.
It can depend on the property and what is being done inside. Check with your local council, particularly in a conservation area or for a listed building.
Real jobs photographed by Apex Roofing.
Two roof windows cut into the low tiled roof of a single storey range in Macclesfield, trimmed, felted, flashed and the concrete tiles relaid around them.
A roof window cut into an old tiled roof in Warrington: tiles lifted, opening trimmed, felt collar dressed round the frame, flashing fitted and tiles relaid.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com