Two roof windows cut into a tiled back roof in Macclesfield
Two roof windows cut into the low tiled roof of a single storey range in Macclesfield, trimmed, felted, flashed and the concrete tiles relaid around them.
The window itself is rarely the problem. Most roof window leaks start at the flashing, the metal or sheet surround that joins the frame to the roof covering.
A roof window sits in a hole in the roof. The flashing is the weather-proofing around that hole. It overlaps the covering on all sides and directs water around and past the frame, rather than allowing it to find a way in.
Flashings are made in different profiles for different coverings. A kit made for plain tiles does not suit deep interlocking tiles or slate, and using the wrong one leaves gaps. The covering around the window must also be cut and relaid correctly so that each part overlaps the next.
This is why windows fitted into old roofs sometimes leak even when the window is perfectly good. The wrong flashing was used, or it was fitted without enough overlap.
Water staining on the ceiling or reveal beside the window is the obvious sign. Others are visible from outside: lifted or distorted flashing, gaps between the flashing and the covering, moss and debris packed against the upper edge, or cracked tiles beside the frame.
Remember that water can travel along rafters before showing. A stain may be some distance from the real source.
Sometimes a flashing can be refitted or a cracked tile replaced. If the flashing is the wrong type, corroded or badly distorted, a new one is the better answer. That means lifting the surrounding covering, so it makes sense to check the underlay collar at the same time.
Windows fitted side by side or stacked use linking kits, so the flashing must be arranged for the combined opening. These need extra care because there are more joints where water can enter.
The covering below the window matters just as much as the flashing. If tiles are cracked or sitting badly, water can find its way past even a good flashing. For that reason, we look at the whole area around a window rather than just the visible metal, and we say so if neighbouring tiles need replacing as well.
Some questions are worth putting to any roofer before you agree to the work.
If you are thinking about roof windows, call Apex Roofing to arrange a free quotation. We will look at the roof, talk through what is possible and tell you honestly what we would recommend.
Call or message Apex Roofing for a free quotation.
Common causes are a flashing of the wrong type, poor overlap, damaged tiles beside the frame or a failed underlay collar. An inspection finds out which.
Sometimes. It depends on the damage. Often the surrounding covering must be lifted to do it properly.
No. It is a temporary patch. The proper repair is to correct the flashing and surrounding covering.
Real jobs photographed by Apex Roofing.
Two roof windows cut into the low tiled roof of a single storey range in Macclesfield, trimmed, felted, flashed and the concrete tiles relaid around them.
A roof window cut into an old tiled roof in Warrington: tiles lifted, opening trimmed, felt collar dressed round the frame, flashing fitted and tiles relaid.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com