Two roof windows cut into a tiled back roof in Macclesfield
Two roof windows cut into the low tiled roof of a single storey range in Macclesfield, trimmed, felted, flashed and the concrete tiles relaid around them.
An old roof window that leaks, mists up or will not open properly can often be replaced in the same opening. The trick is matching dimensions and renewing the weatherproofing around it.
A roof window is a long-lasting part of the roof, but not a permanent one. Seals perish, frames warp, timber rots and glass fails. Some faults can be mended; others point to replacement.
The simplest replacement is like for like. If a window of the same size is available, it can often drop into the existing opening with little disturbance to the structure. Check the label or markings on the frame if you can find them, as that helps identify the model.
Older windows were made in sizes and designs that may no longer be produced, in which case a close match or a modified opening is needed. That means changing the framing or the flashing, and it is worth knowing about before work begins.
The existing flashing and the surrounding tiles or slates are carefully lifted. The old window is released from the rafters and removed, and the opening is checked for rot or damage.
The new window is fixed in position and a new collar or membrane is dressed round the frame. New flashings are fitted, and the covering is relaid. Replacing only the window and reusing worn flashings is a common cause of later leaks.
The replacement is a good time to look at the roof around the window. Cracked tiles, rotten battens and perished felt can be found once the covering is lifted. These are far easier to deal with now than later.
The inside lining and any plaster or paint around the opening may need making good, especially if the old window was damp. Ask what is included, because sometimes the roofer completes the roof side and leaves the internal finishing to a decorator.
Timing is worth thinking about. If the roof is due for work anyway, such as a new covering or repairs to the felt, replacing the window at the same time means the flashing and tiles are only disturbed once. If the roof is in good order, a window swap can usually be done on its own, working around the opening rather than opening up the wider slope.
If you are thinking about roof windows, call Apex Roofing to arrange a free quotation. We will look at the roof, talk through what is possible and tell you honestly what we would recommend.
Call or message Apex Roofing for a free quotation.
Often, after checking the dimensions and compatibility. A like-for-like swap is simplest. Different sizes may need changes to the framing.
Sometimes the glazing unit can be replaced separately, if parts are available. Otherwise the whole window may need replacing.
Yes. They are lifted to fit new flashings and relaid afterwards. Any damaged ones should be replaced.
Real jobs photographed by Apex Roofing.
Two roof windows cut into the low tiled roof of a single storey range in Macclesfield, trimmed, felted, flashed and the concrete tiles relaid around them.
A roof window cut into an old tiled roof in Warrington: tiles lifted, opening trimmed, felt collar dressed round the frame, flashing fitted and tiles relaid.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com