Re-covering and re-sealing a curved bay roof in Altrincham
A curved bay window roof in Altrincham stripped back, re-covered and re-sealed at the wall junction after weather damage. Photographs included.
An apron is the lead sheet that covers a level junction between roof and wall, such as the foot of a chimney. If it lifts or splits, the leak can be hard to trace.
A lead apron is a single piece of lead fixed along the bottom of an upstanding feature, like a chimney stack or a wall that stands across the slope. The top edge is tucked into the brickwork. The lower part is dressed down over the roof tiles or slates so water runs onto the roof and away.
Because it sits on the downhill side of the feature, it takes the full flow of water running down the roof towards it. That makes it a key point of defence.
If a chimney leaks in only one spot on the stack, the apron is often the first place to look. It does not take much of a gap to let water in during driving rain.
Damp on the wall inside, directly under the chimney or abutting wall, is a classic clue. Outside, an apron that has lifted at one corner or dips in the middle may show daylight at the edge. It can be harder to see on a tall stack, so a roofer may check with a camera or from a ladder at a safe angle.
In some cases only a section of apron has failed and a local repair is enough. If the whole piece has lost its shape, replacing it in full is more reliable than trying to reshape old lead.
If the stack itself is leaning or the brickwork is eroding, a new apron will not hold for long. The same is true where the roof covering beneath is failing or the batten is rotten. In those cases, fixing the surroundings comes first.
When you ask for quotes, make sure each one says what lead code is proposed, whether the pointing is included and what is being done about nearby tiles. If your chimney or wall junction is letting water in, we offer a free inspection and a free quotation.
Call or message Apex Roofing for a free quotation.
Look for lifted edges, visible gaps against the brickwork or lead that has sagged. Damp marks on the wall inside, directly below the chimney, can also point towards it.
Minor work is sometimes possible, but to do the job properly the tiles or slates beside and below the apron usually need to be lifted so the lead can be fixed and dressed correctly.
It is the traditional and most widely used material because it can be formed to shape and lasts well. Other products exist, but a roofer should explain why they would choose them over lead.
Real jobs photographed by Apex Roofing.
A curved bay window roof in Altrincham stripped back, re-covered and re-sealed at the wall junction after weather damage. Photographs included.
Damp near a chimney breast in Warrington traced to the stack. Joints repointed, new Code 4 lead fitted, the crown repaired and a water test run afterwards.
A leaking kitchen roof in Sale taken back to the rafters, re-covered on new breathable underlay and treated battens, with the lead at the wall renewed.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com