Re-covering and re-sealing a curved bay roof in Altrincham
A curved bay window roof in Altrincham stripped back, re-covered and re-sealed at the wall junction after weather damage. Photographs included.
Roof windows, extensions and new abutments all add junctions that need weatherproofing. When the lead around them fails, leaks often follow within a few wet spells.
Every time a roof is altered, new junctions appear. A roof window cuts a hole in the covering. An extension creates a new meeting point between old and new roofs, or between a roof and an existing wall. Each of these needs flashing, and lead is often used where the detail is awkward.
Many leaks around these features are not caused by the roof window or the extension itself, but by how the surrounding flashing was fitted or how well it has aged.
For VELUX-type roof windows, the correct flashing depends on the window and the roof covering. If the original kit has been replaced with makeshift pieces, leaks are more likely.
Where an extension roof meets an existing wall, there is usually a stepped or apron flashing. These details are often hidden behind cladding or render. When they are not detailed well, water tracks into the wall cavity or the room below. Another problem is where a new roof overlaps an old gutter or abutment, leaving a gap that cannot be properly sealed.
The pitch, the roof covering, the way the extension was built and the size of the window all matter. If the roof window is old, it may be better to replace the whole assembly rather than patch it, particularly if the frame or seals have deteriorated. Building regulations or planning may be relevant for larger alterations, so check with the council if you are unsure.
If the wall or roof structure around the junction is damp and rotten, the lead is only part of the story. We will explain what we find at the survey and what needs doing first. Ask any roofer who quotes which flashings they are renewing, what material they are using, and whether any timber needs replacing.
If you have a leak around a roof window or at an extension roof, we can arrange a free inspection and a free quotation.
Call or message Apex Roofing for a free quotation.
It could be either. The flashing around the window is a common source, but so are the seals, the glazing and condensation. An inspection will separate them.
Lead is often used for the surrounds, but the right flashing depends on the window type and roof covering. Some windows are designed to use a specific kit.
It depends on the contract and who did the work. If the leak is soon after the build, speak to the builder first. A roofer can assess and report on the fault.
Real jobs photographed by Apex Roofing.
A curved bay window roof in Altrincham stripped back, re-covered and re-sealed at the wall junction after weather damage. Photographs included.
Damp near a chimney breast in Warrington traced to the stack. Joints repointed, new Code 4 lead fitted, the crown repaired and a water test run afterwards.
A leaking kitchen roof in Sale taken back to the rafters, re-covered on new breathable underlay and treated battens, with the lead at the wall renewed.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com