Re-covering and re-sealing a curved bay roof in Altrincham
A curved bay window roof in Altrincham stripped back, re-covered and re-sealed at the wall junction after weather damage. Photographs included.
A valley carries water from two roof slopes down to the gutter, so it takes more rain than almost any other part of the roof. Here is how lead valleys fail and what to do.
Where two roof slopes meet at an internal angle, rain from both runs into the valley. A lead-lined valley, sometimes called a valley gutter, forms a channel that is hidden or partly hidden beneath the tiles or slates on either side.
Because a valley handles a concentrated flow of water, small faults show up quickly. A leaking valley can send water into a ceiling well away from where the problem actually is.
It is easy to blame the lead when the cause is drainage. A valley that fills with debris can overflow even when the metal is intact. Equally, a displaced tile can let water get underneath sound lead. Tracing the real cause is the first step in any lead valley repair.
Look at the valley from a safe position and see whether it is clogged, whether the edges look level and whether the lead is visibly split. Please do not climb up to check; a roofer can inspect it properly and photograph what they find.
The pitch of the roof, the width of the valley, how much water runs into it and the type of covering all influence the details. Some roofs, particularly those with modern concrete tiles, may suit a different type of valley, so we will discuss options if lead is not the best answer.
If the lead has failed along most of its length, patching will only move the leak. If the boards beneath are rotten, they need replacing before any new lead goes down. Where the whole roof covering is at the end of its life, it can make sense to renew the valley as part of wider work.
Ask whether they have found the cause of the leak or are guessing, what is being done about the underlay and boards, and how wide the finished channel will be. A simple photo record before and after is worth having.
If you think a valley is letting water in, we can arrange a free inspection and give you a free quotation for whatever is needed.
Call or message Apex Roofing for a free quotation.
Sometimes. If the lead is sound apart from a local split, a repair may be enough. If it is thin or cracked along its length, renewing the valley is usually better.
That usually points to a blockage or a channel that is too narrow to carry the flow. Debris, moss or tiles cut too close to the centre line can make water spill over.
The tiles have to be lifted to reach the valley, but many can be re-laid. Broken or poor-quality ones are replaced as the work goes on.
Real jobs photographed by Apex Roofing.
A curved bay window roof in Altrincham stripped back, re-covered and re-sealed at the wall junction after weather damage. Photographs included.
Damp near a chimney breast in Warrington traced to the stack. Joints repointed, new Code 4 lead fitted, the crown repaired and a water test run afterwards.
A leaking kitchen roof in Sale taken back to the rafters, re-covered on new breathable underlay and treated battens, with the lead at the wall renewed.
Apex Roofing covers Cheshire and the surrounding area. Choose your town for local information.
Apex Roofing Cheshire · 5 Weybridge Close, Warrington WA4 5LZ
Tell us about the property and what you have noticed and we will come back to you.
Prefer to talk? Call 07377 461095 · WhatsApp +44 7465 861265 · Email apexroofing14@gmail.com